Aries Cerat

High Performance Audio

Nil Satis Nisi Optimum

 

 

Your Perception About HiEnd is About to Change!

  • 1
  • 2
  • 3
  • 4

Stentor speaker

stentor main

Our smallest speaker yet, the Stentor is ready to change the way mid-efficiency speakers perform.
A small successor of the Gladius speaker, the Stentor keeps the sonic virtues of the bigger brother while keeping the weight and size to even more manageable figures.
Bass-midbass driver used ,is a carbon fiber 10'' driver, loaded in a sealed enclosure. The carbon fibers are not woven in texture to avoid standing waves and break-up modes present in every other carbon fiber woofer.

Midrange driver is an ultra light, mica and plant fiber cone reproducer, treated in house. The midrange enclosure uses a unique technique of diffusing the back wave, making the driver enclosure anechoic in the band used.


The high and Ultra high frequency band is reproduced by a custom made True Ribbon tweeter, a close sibbling of the Gladius tweeter, also using an aluminium foil of just 4 milligrams in weight. It’s transient response is not matched by any tweeter on the market, and it's frequency range is kept linear up to 100KHz without any breakups, in opposition to any other conventional tweeter.

The Stentor filters are designed and developed using proprietary techniques,top engineering programs and endless ear-tuning hours, using real time A/B blind testing for every parameter of the design. The crossover points,variable slopes attenuation slopes and offset positioning of the drivers are tailor -cut to the greatest of accuracy.
Time coherency and directivity pattern linearity of the speaker is unique, and gives the speaker virtues that stand ahead of the competition. Stage depth, accuracy and physical presence of the recorded instruments are unsurpassed.
Crossover part count stops at 60 parts per pair, and includes top quality air core copper foil inductors, near zero ohm inductors for the woofer filters, paper in oil-foil capacitors and supreme quality polystyrene capacitors.
Sensitivity @ 1W @ 1m : 88db
Weight each : 50Kg

Crossover Frequencies/slopes

Midbass/mid : 450Hz 2nd & Variable slope (maximun GD linearity ptimized)
Mid/High : 3000Hz Variable Slope & Variable slope (maximumGDlinearity optimized)
Nominal Impedance : 8ohm (5.1ohm minimum)
Dimensions (inc Base) : 1310mmH X 450W X 360D


The speakers can be custom finished in any Colour available in the auto industry.
External Crossover optional

Speakers are provided with laser speaker toe in/tilt adjustment tool for optimum placement.

Gladius Speaker

 gladius main

The need for a relatively sensitive conventional floor stander, lead us to the design of a not-so-conventional speaker. The Gladius speaker is born.
Using the best possible drivers for the bandwidth intended to operate, and keeping the overall cabinet volume as down to earth possible, our 3-way creation claims to be among the best direct radiating floor standers made.

The low end is delivered by an acoustic suspension loaded 12'' driver. With ultra light cone of just 55gms and it's 28mm Xmax delivers more tuneful bass notes than any BR design can reproduce. Using proprietary resistive bass loading techniques, we managed to keep the total system Q down with as little internal volume possible, at the same time using a very light bass driver. With a total Qtc of 0.65 ,we combine optimal transient ,phase and frequency response.
The woofer's cabin is made form randomly layed wooden layers made from two variations of plywood ,which differ in density, for breaking-up vibration modes. The cabin is internally braced,and is coated with a special polyurethane rubber 15~25mm in thickness, which dampens the vibrations and making the speaker as acoustically dead as possible.

Our midrange driver is enclosed in a specially made bullet-shaped structure made from solid wood ,designed to eliminate diffraction, making the midrange driver virtually baffle less.


The critical midrange band is solely delivered by an 5'' AlNiCo magnet driver, in the separate bullet-shaped sealed enclosure. Only this ultra fast driver,(3.5gms Mms ) can be seamlessly be blended with our high frequency reproducer. Our midrange driver is a highly linear and extended range driver which can reproduce a frequency range of 100Hz ~ 18KHz with very high linearity, and it is used only as an 2,5 octave driver, keeping the best out of this highest quality reproducer.


The high and Ultra high frequency band is reproduced by a custom made True Ribbon tweeter.The ribbon is using an aluminium foil of just 4 milligrams in weight, and an amorphous core transformer. It’s transient responce is not matched by any tweeter on the market, and it's frequency range is kept linear up to 100KHz without any breakups, in opposition to any other conventional tweeter.

The external crossover uses copper foil inductors and polypropylene capacitors, and is time domain optimized. The crossover can be factory custom-configured to perfectly match your listening room.

 

Speaker Specifications

Sensitivity @ 1W @ 1m : 91db


Weight each : 67Kg


Crossover Frequencies/slopes:


Midbass/mid : 500Hz 2nd & Variable slope (maximun GD linearity optimized)
Mid/High : 3200Hz Variable Slope & Variable slope (maximum GD linearity optimized)


Nominal Impedance : 5ohm(4.1ohm minimum)*see impedance chart

Dimensions (w/o Base) : 137mmH X 400W X 320D

The speakers can be custom finished in any Colour available in the auto industry,or in narural wood finish.

Login Form